<div>repeating this to get it into the archive</div>
<div> </div>
<div> </div>
<div><font face="Helv" size="2"><font face="Helv" size="2">
<p dir="ltr"><a href="http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=568-5093-ND">http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=568-5093-ND</a></p>
<p dir="ltr">Other parts like Linear Tech are in the same price range. TI seems to be double in cost as are Analog Devices.</p>
<p dir="ltr">Can we do this with a single ADC or do we need to do duals with I/Q (and 1/2 the sample rate)? I'm thinking a single faster converter and doing the I/Q conversion either in the FPGA or in the Beagle board might work (a Hilbert transform along the way somewhere?) ? But I am no expert on this. I dabble in DSP enough to be dangerous. But this might be something to present to someone around here who is a DSP/FPGA guru who wants to help.</p>

<p dir="ltr">Yes, it's SPI to control it and LVDS DDR to get the data out.. but that is no issue if it's feeding a FPGA.. it's probably an advantage as less pins need to be routed from the device to the FPGA.</p>

<p dir="ltr">When I looked into DAC's for TX, the price was about $12 for one that's complementary.. obviously it's a lot easier to do a D/A...</p>
<p dir="ltr">But maybe $60-80 for the A/D and D/A's.. hopefully no more than $50 for a FPGA. I think the DUC/DDC topology is very do-able if we don't have to do it with I/Q to RF. Actually. it would likely be less expensive to do it this way.. and 16-bits is "OK"..</p>

<p dir="ltr">80+50+100 for the rest of the board at cost means about a $250 board.. that plus another $100 for RF parts (amplifier to 5W say, and a preamp, filters and AGC) and $170 for a BB-xm (delivered with cables and Powersupply) is about $550 dollars-ish.. so that's 1/3 of the RF Space receiver.. And that will get us a Flex-1500 capability with out the Latency problems, and full digital DDC/DUC... I think it can be done...</p>

<p dir="ltr"> </p>
<p>Fred</p></font></font></div>