[SDR] when to meet --- Re: NO MEETING TONIGHT

Wed May 11 14:16:27 CDT 2011

so.... what is the final word on tomorrow? 
I am running tests for FAB-T  1-9(pm) - so if there IS a meeting (along 
with the CVARC meeting) I will have to come in earlier - just need to know 
today

Charley

"Allen Tupker" <aetupker at aol.com> 
Sent by: sdr-bounces+cwsnodgr=rockwellcollins.com at rf.org
05/10/2011 10:39 PM

To
<sdr at rf.org>
cc

Subject
Re: [SDR] when to meet --- Re:  NO MEETING TONIGHT

I intend to come to the meetings but something has come up every time. 
Other days of the week may not be any better than past tuesdays for me. 
I like opt A.  Mon, Thurs, Tues, in order of preference.
----- Original Message ----- 
From: jdwolf at rockwellcollins.com 
To: fmspinne at rockwellcollins.com 
Cc: sdr-bounces+jdwolf=rockwellcollins.com at rf.org ; sdr at rf.org 
Sent: Tuesday, May 10, 2011 2:42 PM
Subject: Re: [SDR] when to meet --- Re: NO MEETING TONIGHT

Hi Fred, 

I am on the distribution now.  I'm trying to ramp up on what is going on. 
At the next meeting I hope to gather most of that.  Until then... 

Best Regards,

~Jeremiah
------------------------------------------------------------------------------
Jeremiah D. Wolf
Sr. Electrical Engineer
Antenna Technology
Advanced Technology Center

Rockwell Collins, Inc.
M/S 108-102
400 Collins Rd NE
Cedar Rapids, IA 52498-0001 USA

Work: (319) 295 - 2207
Cell:   (319) 899-6755
Fax:   (319) 295 - 3751
jdwolf at rockwellcollins.com 
jeremiah.wolf at gmail.com
------------------------------------------------------------------------------ 

From:        fmspinne at rockwellcollins.com 
To:        sdr at rf.org 
Date:        05/10/2011 02:37 PM 
Subject:        Re: [SDR] when to meet --- Re:  NO MEETING TONIGHT 
Sent by:        sdr-bounces+jdwolf=rockwellcollins.com at rf.org 

Since the Technician class is over for the kids (who aren't ready to take 
the test in May-- but that is more my fault than theirs.. hopefully at 
least one will take the test and pass before summer is up!).. Thursdays 
will work out okay going on for me. 

Getting FLDIGI to work is farther than I've gotten.  I tried Angstrom and 
the audio is hopelessly broken on that distro unless you build it yourself 
from scratch.  I've not had the time. 
I've not even had the time to hook up the TL-922A I bought yet.. and it'll 
get used before the BB-xm does again!  :O) 

Once Ubuntu has a version with a properly patched Kernel that runs the 
OMAP at full speed, I think I know what I'm going to use.... 

So are you trying DTTSP for the softrock, or what are you using? 

Jeremiah Wolf (at Rockwell 295-2207) called me last night about the 
BeagleBoard project.. has anyone talked with him today or added him to 
this list? 

Fred 

grlind at rockwellcollins.com 
Sent by: sdr-bounces+fmspinne=rockwellcollins.com at rf.org 
05/10/2011 02:17 PM 

To
sdr at rf.org 
cc

Subject
[SDR] when to meet --- Re:  NO MEETING TONIGHT

option "A"   1x weekly for 2 hours --- I think we need about 2 hours to 
hash things out.. we can cut back time and frequency as we get going... 

I would like to suggest Tuesdays but based on current attendance it is not 
working - I think Thursday would be a good second in my case. 

Preference: 
1. A 
2. B 
3. C 

Just a note we have a Linux Distro of Ubunto on a BeagelBoard  running 
FLDIGI.  We have a Softrock hopefully have it receive  HF this week. 
Cameron had to play around with sound mixer and audio settings to make 
this work... It  is decoding a recorded wave file of a PSK31 QSO. 

Gregg 

Barry Buelow <barry.buelow at gmail.com> 
Sent by: sdr-bounces+grlind=rockwellcollins.com at rf.org 
05/10/2011 12:37 PM 

To
sdr at rf.org 
cc

Subject
[SDR] NO MEETING TONIGHT

Folks, 

The regular Tuesday night meeting isn't drawing a crowd.  I thought this 
was a convenient time when the weather was bad/poor.  The CLC conflict 
didn't help attendance either.  Now that summer has finally arrived, 
everyone will want to be out the door in a hurry. 

While I'd prefer the pace of a weekly meeting, at least until some key 
technical decisions are made, I'm not sure there is sufficient interest to 
continue. 

I propose the following meeting options: 

A.  Continue weekly 5pm meeting (something other than Tuesday)  If you 
vote for this, select a preferred day of the week. 

B.  Every _other_ week, 5pm, suggest a weekday 

C.  Monthly, 7-9pm.  Day tbd 

D.  Lunch hour meeting.  This is difficult as some folks will have to 
drive.  If we rotate location, people loose track.  Maybe we could do 
Netmeeting. 

Please reply with 2 or 3 preferences in order of preference: 
1.  (most desired) 
2. 
3. 

I know there continue to be informal hallway discussions, while these are 
good, they aren't getting widespread visbility.  Also, many rehash "good 
ideas" with NO supporting analyses.  This doesn't count as progress. 

We need to achieve critical mass soon, or CARC SDR is just going to fade 
away (and I'll blame it on D*) 

Barry 

_______________________________________________
Sdr mailing list
Sdr at rf.org
https://rf.org/mailman/listinfo/sdr
_______________________________________________
Sdr mailing list
Sdr at rf.org
https://rf.org/mailman/listinfo/sdr
_______________________________________________
Sdr mailing list
Sdr at rf.org
https://rf.org/mailman/listinfo/sdr

_______________________________________________
Sdr mailing list
Sdr at rf.org
https://rf.org/mailman/listinfo/sdr

No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1325 / Virus Database: 1500/3629 - Release Date: 05/10/11
_______________________________________________
Sdr mailing list
Sdr at rf.org
https://rf.org/mailman/listinfo/sdr

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rf.org/pipermail/sdr/attachments/20110511/05fdeeec/attachment.html>