<br><font size=2 face="sans-serif">Robert gave a talk at superlaunch about
the same issues you found, he had 2 things you might try.</font>
<br><font size=2 face="sans-serif">1. Try using clear plastic instead of
black, it has lower surface heating, less likely to melt, and can be found
in more thicknesses. &nbsp;A seam sealer might also work better than tape.</font>
<br><font size=2 face="sans-serif">2. He also suggested using black powder
inside, like fine charcoal or dry black paint mix powder, it heats up the
inside of the balloon, but the clear means the exterior doesn't get as
hot. &nbsp;Just pour in some, shake, and it will stick by simple static
electricity.</font>
<br>
<br><font size=2 face="sans-serif">As for the launch, I agree that a low
lift balloon will always be more of a concern, but since plastic doesn't
conduct electricity well, you worry less about power lines. &nbsp;The other
thing that would be good on low altitude flights would be a strobe or blinker,
something to help you see it better.</font>
<br>
<br><font size=2 face="sans-serif">There are a couple of active APRS ballon
launch sites out there, they can give better advice than me. &nbsp;Look
for them on the NSTAR website for links, or go to arhab email reflector
for dates when and where.</font>
<br>
<br><font size=2 face="sans-serif"><br>
David J Huff<br>
Rockwell Collins Inc.<br>
CS Test Engineer<br>
319.295.8949</font>
<br>
<br>
<br>
<table width=100%>
<tr valign=top>
<td width=40%><font size=1 face="sans-serif"><b>Jerry Pasker &lt;info@n-connect.net&gt;</b>
</font>
<br><font size=1 face="sans-serif">Sent by: craprs-bounces+djhuff=rockwellcollins.com@rf.org</font>
<p><font size=1 face="sans-serif">09/22/2008 12:17 PM</font>
<td width=59%>
<table width=100%>
<tr>
<td>
<DEFANGED_div align=right><font size=1 face="sans-serif">To</font></DEFANGED_div>
<td valign=top><font size=1 face="sans-serif">craprs@rf.org</font>
<tr>
<td>
<DEFANGED_div align=right><font size=1 face="sans-serif">cc</font></DEFANGED_div>
<td valign=top>
<tr>
<td>
<DEFANGED_div align=right><font size=1 face="sans-serif">Subject</font></DEFANGED_div>
<td valign=top><font size=1 face="sans-serif">[CRAPRS] Balloon</font></table>
<br>
<table>
<tr valign=top>
<td>
<td></table>
<br></table>
<br>
<br>
<br><font size=2><tt>Posting from the CRAPRS mailing list:<br>
I should clarify what I'm up to a little better. &nbsp;A video is here:
<br>
http://www.youtube.com/watch?v=6sb0_3MlNxc<br>
<br>
I found only a few solar balloons that were combined with APRS payloads.<br>
<br>
 &nbsp; http://www.arrl.org/news/stories/2004/03/03/103/?nc=1<br>
<br>
&lt;SNIP&gt;<br>
</tt></font>
<br>