Spam ? - Re: [CRAPRS] Gregg's APRS
Ron Tonneson
ron.tonneson at gmail.com
Tue Mar 27 12:47:32 CDT 2007
We are using UIDigi. It does not have anything called DWAIT. It's configuration file is below:
/*
UIDIGI Configuration source file
Version 1.9 BETA 3 20040101
Written by Marco Savegnago IW3FQG
2005/05/17: Configured for 'The New-N Paradigm', N=3, by Ron Stordahl,
N5IN. See InfoText,UIDigiCall,UIFloodCall,UITracecall,UIFLOODOptions,
UITRACEOptions,UIOnly,BeaconNInterval,BeaconNText
*/
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Set the digipeater ax.25 address callsign (SSID allowed)
// Up to 6 characters+SSID
// Digicall [t]
DigipeaterCallsign = W0CXX-5
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Set the digipeater address alias
// Up to 6 characters (NO SSID)
// DIGIAlias [t]
DigipeaterAlias = CARC
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Digipeater Info Text up to 80 char
// Info [t]
//
12345678901234567890123456789012345678901234567890123456789012345678901234567890
InfoText = New-N Paradigm W3,IAn Cedar Rapids, IA
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Path used when SSID routing is used (Up to 8 hops)
// (Direction) Path
// xpath [path]
NorthPath =
SouthPath =
EastPath =
WestPath =
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// BudList Calls (up to 8 calls, default none)
// All SSID's of base call will be ignored
// BUdlist [calls]
BudList =
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// UI Generic Calls (up to 8)
// Calls recognized by digi to repeat
// Default (RELAY, WIDE, TRACE)
// Uidigi [calls]
UIDigiCall = WIDE4-4,WIDE5-5,WIDE6-6,WIDE7-7,WIDE5-4,WIDE6-5,WIDE6-4,WIDE7-6
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// UI Flood Call (up to 6 characters)
// Default (WIDE)
// UIFlood [call]
UIFloodCall = IA
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// UI Trace Call (up to 6 characters)
// Default (TRACE)
// UITrace [call]
UITraceCall = WIDE
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Txdelay (default 30 = 300)
// range 1-255 x10ms
// TXdelay [n]
TxDelay = 30
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Fullduplex (default 0)
// Enables (1) or Disables (0)
// NO COMMAND FROM CONSOLE
FullDuplex = 0
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// PPErsistence (default 64)
// range 1-255
// Parameter fo channel access timing
// PErsistance [n]
PPersistance = 255
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Slottime (default 10)
// range 1-255 x100ms
// SLottime [n]
SlotTime = 1
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Frack (default 5)
// range 1-15
// Frack [n]
Frack = 5
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Maxframe (default 4)
// range 1-7
// MAxframe [n]
Maxframe = 4
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Retry (default 10)
// range 0-127
// RETry [n]
Retry = 10
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// RespTime 2 (default 100)
// range 0-6000 ms
// RESPtime [n]
RespTime = 100
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Link Check (default 18000)
// range 0-65535 ms
// CHeck [n]
LinkCheck = 18000
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Duplicate Packet Suppression Interval second (default 25)
// range 0-180 seconds
// UICheck [n]
DuplicateSuppression = 30
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Loop Packet Suppression Interval Mask (default 3)
// 0x01 = Do not repeat frame with source address equal to digipeater call or alias
// 0x02 = Do not repeat frame with the digipeater call in the already digipeated via list
// range 0-3
// UILoop [n]
LoopSuppression = 3
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Treat different SSID in destination call (default 1)
// Enables (1) or Disables (0) UISSID digipeating mode
// Used for SSID Directional routing
// UISsid [n]
HandleUISSID = 0
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Reply to Query (default 1)
// Enables (1) or Disables (0) ?APRS? response query
// UIQuery [n]
ReplyToQuery = 1
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// UIFLOOD Algorithm flag (default 0)
// Bit 0: FLOODCALLn-0 will be repeated
// Bit 1: Insert callsign before FLOODCALLn-N
// BIT 2: Put has been repeated flag on FLOODCALLn-0
// BIT 3: Make call substitution on FLOODCALLn-0
//
UIFLOODOptions = 4
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// UITRACE Algorithm flag (default 0)
// bit 0 makes call substitution after the last TRACEn-n digied
// bit 1 Disables
// UITRFl [n]
UITRACEOptions = 2
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Make call substitution when repeat frames addressed to UIDIGI Callsign
// default (1)
// Enables (1) or Disables (0) UIDIGI callsign substituion for UIDIGI calls
// UIDCsb [n]
UIDIGICallSubstitution = 1
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Preempt calls (default none)
// see docs
PreemptCalls =
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Preempt add (default none)
// see docs
PreemptAdd =
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Preempte Digipeater (default 0)
// see docs
PreeemptedDigipeat = 0
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Don't change SSID (decrement) to UI Message (frame with info that start
// with char '~' default (1)
// 0 disables
// range 0-1
// UIMessage [n]
UIMessage = 1
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Process only UI Frame (default 1)
// Enable processing of UI frame only
// 0 disables
// range 0-1
// UIOnly [n]
UIOnly = 0
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// PID of processed frames (default 240)
// Enable frame filtering algorithm base on PID of frame
// 0 disables
// range 0-255
// UIPid [n]
UIPID = 240
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Sysop Password up to 80 char
// NO CONNAMD FROM LOCAL CONSOLE
SysopPassword =
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Beacon x interval Seconds
// default 1 = 600
// default 2 = 1800
// default 3 = 3600
// range 0-65535 seconds
// BEacon [x] [n]
Beacon1Interval = 600
Beacon2Interval = 1740
Beacon3Interval = 599
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Beacon x offset (default 0)
// range 0-65535 seconds
// BEACONOffset [x] [n]
Beacon1Offset = 0
Beacon2Offset = 0
Beacon3Offset = 0
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Digipeater Beacon x Text up to 70 char
// see APRS reference doc for layout
// BText [n] [t]
//
1234567890123456789012345678901234567890123456789012345678901234567890
Beacon1Text = !4201.90NS09138.58W#PHG5260 W3,IAn Cedar Rapids Iowa
Beacon2Text = !4201.90NS09138.58W#PHG5260 W3,IAn Cedar Rapids Iowa
Beacon3Text = }146.745->APOBJ:!4202.01N/09138.92WrPHG9450 PL is open W0GQ-R
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Destination ax.25 address of beacon (6 characters + SSID)
// See APRS working group documentation APNUnn
// UNproto [t]
BeaconDestination = APNU19-3
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// AX.25 Beacon x path (up to 8 hops)
// Path that Beacon x will be sent out with
// Bdl [x] [path]
Beacon1Path =
Beacon2Path = WIDE2-1
Beacon3Path =
AuxPath =
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Destination ax.25 address of aux input device string
// Up to 6 characters + SSID
AuxDestination = AUX
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Aux Beacon interval (default 0)
// Sets the interval for the beacon of aux input data
// AUXRate [n]
AuxRate = 0
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
David Huff wrote:
> Posting from the CRAPRS mailing list:
> That rules out many of the simple things. I would check the KC0SKM
> tracker setup and tuning. One other question, what is the DWAIT time
> for the digipeaters? If the Wait time for CXX is longer, it might be
> dropping stuff because it hears other ones repeat the data.
>
More information about the CRAPRS
mailing list